1. Align the memory module's edge connector with the slot in the center of the memory module connector. The memory module is keyed, or designed to fit into the connector in only one direction. The slot on the system board is notched so that the memory module can be firmly seated only one way.
2. With the module at a 45-degree angle, press the memory module's edge connector firmly into the memory module connector.
3. Pivot the memory module down until it clicks into place.
If you do not hear a click as each end of the memory module snaps into the tabs, remove the memory module and reinstall it.
Palm Rest Assembly
The palm rest assembly consists of the palm rest, status lights, and touch pad assembly.
Q NOTICE: Disconnect the computer and any attached devices from electrical outlets, and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.
NOTICE: Read "Preparing to Work Inside Your Computer" before performing the following procedure.
Was this article helpful?
Read how to maintain and repair any desktop and laptop computer. This Ebook has articles with photos and videos that show detailed step by step pc repair and maintenance procedures. There are many links to online videos that explain how you can build, maintain, speed up, clean, and repair your computer yourself. Put the money that you were going to pay the PC Tech in your own pocket.