PC Card Cage Removal

Figure 35. PC Card Cage Components

Figure 35. PC Card Cage Components

1

4-mm screw

2

PC card cage

3

System board

4

18-mm screws (4)

5

Audio bezel

This procedure assumes that you have removed the system board from the plastic case. To remove the PC Card cage (see Figure 34), perform the following steps:

1. Remove the 4-mm screw securing the audio bezel.

2. Remove the audio bezel.

3. Remove the four 18-mm screws securing the PC Card cage to the system board.

Use a support for the system board to prevent the board from flexing when the card cage screws are removed.

4. Gently pull the card cage off of connector UP9 on the system board. Do not rock the cage to remove it, because this may damage the connectors.

Replace the PC Card cage if it is damaged.

The Ultimate Computer Repair Guide

The Ultimate Computer Repair Guide

Read how to maintain and repair any desktop and laptop computer. This Ebook has articles with photos and videos that show detailed step by step pc repair and maintenance procedures. There are many links to online videos that explain how you can build, maintain, speed up, clean, and repair your computer yourself. Put the money that you were going to pay the PC Tech in your own pocket.

Get My Free Ebook


Post a comment