1 4-mm screw
2 RJ-11 card
To remove the RJ-11 card (see Figure 32), perform the following these steps
1. Remove the 4-mm screw securing the RJ-11 card to the system board.
2. Lift the card off the system board.
Figure 34. System Board Components
2 System board
This procedure assumes that you have removed the PC Card heat sink and hinge saddles. To remove the system board (see Figure 33), perform the following steps:
1. Remove the three 4-mm screws from the bottom of the computer.
2. Remove the system board from the bottom case.
Was this article helpful?
Read how to maintain and repair any desktop and laptop computer. This Ebook has articles with photos and videos that show detailed step by step pc repair and maintenance procedures. There are many links to online videos that explain how you can build, maintain, speed up, clean, and repair your computer yourself. Put the money that you were going to pay the PC Tech in your own pocket.