Mini PCI Card Assembly

NOTICE Disconnect the computer and attached devices from electrical outlets and remove any installed batteries. NOTICE To avoid ESD, ground yourself by using a wrist grounding strap or by periodically touching an unpalnted metal surface on the computer. You must remove the optional Mini PCI card assembly before the system board assembly can be removed. A Mini PCI card assembly may consist of a modem, a network adapter, a modem and network adapter combination, or a wireless network adapter. A...

System Board Assembly

M2.5 x 4-mm captive washer screws (3) M2.5 x 4-mm captive washer screws (3) NOTICE Disconnect the computer and attached devices from electrical outlets and remove any installed batteries. NOTICE To avoid ESD, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface on the computer. The system board's BIOS contains the system service tag number, which is also visible on a bar-code label on the bottom of the computer. The replacement kit for the...

Removing the Memory Module Cover

NOTICE To avoid damaging the system board, you must remove the main battery before you service the computer. NOTICE Make sure that the work surface is clean to prevent scratching the computer cover. NOTICE Handle memory modules with care. Do not touch the components on a module. Hold a module by its edges. 1 Follow the instructions in Preparing to Work Inside the Computer. 3 Disengage the metal tabs at the opposite end of the cover. 1 Remove the memory module cover. 2 To release a memory...