Removing the Modem Daughter Card

NOTICE: Disconnect the computer and any attached devices from electrical outlets and remove any installed batteries.

NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by periodically touching unpainted metal on the computer.

1. Follow the instructions in "Preparing to Work Inside the Computer."

2. Turn the computer over and remove the memory module/modem cover.


modem daughter card


M2 x 3-mm screw

3. Remove the M2 x 3-mm screw that secures the modem daughter card to the system board.

4. Use the pull tab to pull the modem daughter card straight up out of its connector.

Q NOTICE: Do not pull on the modem cable. Pull the connector on the end of the cable to disconnect the cable.

5. Disconnect the modem cable from the modem daughter card.

Was this article helpful?

0 0
The Ultimate Computer Repair Guide

The Ultimate Computer Repair Guide

Read how to maintain and repair any desktop and laptop computer. This Ebook has articles with photos and videos that show detailed step by step pc repair and maintenance procedures. There are many links to online videos that explain how you can build, maintain, speed up, clean, and repair your computer yourself. Put the money that you were going to pay the PC Tech in your own pocket.

Get My Free Ebook

Post a comment