Product Information Guide

Computer Cable Routing

NOTICE To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer). NOTICE To avoid damaging the system board, you must remove the main battery before you begin working inside the computer. 1 Follow the procedures in Before You Begin on page 81. 2 Loosen the two captive screws and remove the Mini PCI card cover. 3 Disconnect the antennae cables from the Mini PCI card....

Caution Before you begin any of the procedures in this section follow the safety instructions in the

NOTICE To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer). NOTICE To avoid damaging the system board, you must remove the main battery before you begin working inside the computer. 1 Follow the procedures in Before You Begin on page 81. 2 Turn the computer over and loosen the captive screws from the modem cover. 3 Place your finger under the cover at the...