^^ NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer).
^^ NOTICE: To avoid damaging the system board, you must remove the main battery before you begin working inside the computer.
1 Follow the procedures in "Before You Begin" on page 81.
2 Loosen the two captive screws and remove the Mini PCI card cover.
3 Disconnect the antennae cables from the Mini PCI card.
4 Remove the hinge cover. See "Hinge Cover" on page 92.
5 Remove the four screws securing the display.
6 Disconnect the display cable, using the pull-tab.
7 Lift the display away from the computer at a 90-degree angle. Ensure that the antenna cables and display cable are free from the routing channels and that the cables move freely when you lift the display.
When you replace the display, ensure that the ribbon tape around the display cable is securely tucked underneath the tabs. Insert the antenna wires through the hinge cover opening and then through the hole in the system board. Ensure that the antenna wires are not twisted and that they are securely attached to the Mini PCI card.
Was this article helpful?
Read how to maintain and repair any desktop and laptop computer. This Ebook has articles with photos and videos that show detailed step by step pc repair and maintenance procedures. There are many links to online videos that explain how you can build, maintain, speed up, clean, and repair your computer yourself. Put the money that you were going to pay the PC Tech in your own pocket.