Keyboard Assembly

Key Board Track Stick

To remove the keyboard assembly, perform the following steps. NOTICE To avoid damaging the system board, you must remove the main battery before you service the computer. NOTICE Make sure that the work surface is clean to prevent scratching the computer cover. 1. Close the display assembly, and turn the computer upside down on a flat work surface. 2. Remove the seven 10-mm screws, labeled with a circle K, that secure the keyboard to the computer (see Figure 9). 3. Turn the computer right-side...

Microprocessor Module

Dell Latitude Cpt

NOTICE To avoid damaging the system board, you must remove the main battery before you service the computer. 2. Remove the keyboard assembly. NOTICE To ensure maximum cooling for the microprocessor, do not touch the heat transfer areas on the thermal cooling assembly (TCA). The oils in your skin reduce the heat transfer capability of the thermal pads. 3. Remove the two 3-mm screws on the microprocessor shield that secure the thermal cooling assembly to the microprocessor module (see Figure 12)....

Removing Field Replaceable Parts and Assemblies

Computer Mouse Exploded Assembly

The following subsections provide instructions for removing and replacing field-replaceable parts and assemblies. Figure 6. Hard-Disk Drive Assembly Removal Figure 6. Hard-Disk Drive Assembly Removal NOTICE To avoid damaging the system board, you must remove the main battery before you service the computer. NOTICE The hard-disk drive is very sensitive to shock. Handle the assembly by its edges (do not squeeze the top of the hard-disk drive case), and avoid dropping it. NOTICE Make sure that the...