Modules

Your computer ships with an optical drive installed in the module bay. However, the device screw is not installed in the optical drive but packaged separately. When you install your device in the module bay, you can install the device screw. NOTE You do not need to install the device screw unless you want to secure the module inside the computer for security purposes. If the Device Screw Is Not Installed Q NOTICE To prevent damage to devices, place them in a safe, dry place when they are not...

JV Caution Before performing the following procedures read the safety instructions in your System Information Guide

Q NOTICE To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer. (J) NOTICE You must remove the display assembly before you remove the palm rest. 1. Follow the instructions in Preparing to Work Inside the Computer. 2. Turn the computer over and remove the two M2.5 x 12-mm screws labeled D on the bottom of the computer. 3. Turn over the computer and open the display. 4....