JV Caution Before you begin any of the procedures in this section follow the safety instructions in the System

Q NOTICE Disconnect the computer and any attached devices from electrical outlets. Q NOTICE To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer. Q NOTICE Read Before You Begin before performing the following procedure. 10. Remove the modem card, if present. 11. Remove the three M2 x 4-mm screws that secure the system board to the bottom case. Xa NOTE Each system board screw has an arrow beside it. 12. Disconnect the left and...

A Caution Before performing any of the procedures listed below read and follow the safety instructions in the System

Ensure that the work surface is flat and clean to prevent scratching the computer cover. 2. Save and close any open files, exit any open programs, and then shut down the computer. 3. If the computer is connected to a media base (docked), undock it. See the documentation that came with the media base for instructions. 4. Disconnect the computer from the electrical outlet. 5. Wait 10 to 20 seconds and then disconnect any attached devices. 6. Remove any installed PC Cards or blanks, battery, and...