JV Caution Before you begin any of the procedures in this section follow the safety instructions in the System Information Guide

Q NOTICE: Disconnect the computer and any attached devices from electrical outlets.

Q NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.

Q NOTICE: Read "Before You Begin" before performing the following procedure.

tH

Remove

the

battery.

2.

Remove

the

keyboard.

3.

Remove

the

palm rest.

4.

Remove

the

hinge covers.

5.

Remove

the

display assembly.

6.

Remove

the

keyboard tray.

7.

Remove

the

hard drive.

.

Remove

the

memory module.

9.

Remove

the

Mini PCI card, if present.

10. Remove the modem card, if present.

11. Remove the three M2 x 4-mm screws that secure the system board to the bottom case.

Xa NOTE: Each system board screw has an arrow beside it.

1

system board

see Mini RSL

2

M2 x 4-mm screws (3)

98MKC

3

status light (LED) cable

12. Disconnect the left and right speakers from their system board connectors.

13. Disconnect the reserve battery connector from the system board connector.

14. Disconnect the Bluetooth cable from the system board, if a Bluetoothâ„¢ device is present.

15. Lift the ZIF connector, and remove the status light (LED) cable from its ZIF connector on the system board.

16. Lift the system board up, from the right side, and out of the bottom case.

The Ultimate Computer Repair Guide

The Ultimate Computer Repair Guide

Read how to maintain and repair any desktop and laptop computer. This Ebook has articles with photos and videos that show detailed step by step pc repair and maintenance procedures. There are many links to online videos that explain how you can build, maintain, speed up, clean, and repair your computer yourself. Put the money that you were going to pay the PC Tech in your own pocket.

Get My Free Ebook


Post a comment